(Package Deal) Honda Ruckus 20mm Carb Kit and Camshaft Complete Metro NPS50
This is a Package Deal, included is 1 - 20mm Carb Kit and 1 - High Performance Camshaft. This NEW camshaft is in stock now. This camshaft has more lift and more duration than the stock camshaft to make more power in the effective RPM range that the Ruckus / Metro engines prefer. More fuel/air mixture to be burned and more exhaust flowing out equals more power.
If you are trying to extract every last bit of power from your scooter you will need one of these to do it. This item (as well as any other camshaft) will require the adjustment of the valves to the correct tolerances.
Installation by a mechanic is recommended. Looking for more acceleration and power from your Honda Ruckus scooter or are you looking to replace a worn out stock carburetor? This is the most complete kit on the market today as well as the original kit to include a solid intake manifold. This Aluminum manifold has been designed for the Honda Ruckus / Metro specifically and utilizes improved flow characteristics from the larger 20mm carb.
The stock carburetor size is only a 15mm. When adding an exhaust to the Ruckus almost 100% of the time you will have to rejet the carb, it is sometimes hard to find the correct jets need for the stock carb, this carb makes it easier. Not only do you get to remove the airbox with a free flowing air filter; you also get a complete carb kit with all needed jets to fine tune your scooter. This carb is also pre-modified to use on the Honda Ruckus / Metropolitan as well so no need to get your hands dirty to modify the carb, it is already done for you.
This kit will work on all year models of the Honda Ruckus from 2003-up. When using this kit on the Honda Metro you will have to make a clearance for the throttle cable near the storage area. All kits include the following components. (NEW Now Polished) Aluminum intake manifold (Other kits include a manifold with a cheap rubber mount that is known to rip and tear in a short time frame). All kits include a plastic 4 compartment box for sorting/storing jets and other small items.
All o-rings/gaskets needed for install. 20mm carburetor (Completely modified for use on the Ruckus, Drain fitting is trimmed, and choke lever is modified). Honda style flange bolts for mounting the carb to the manifold. Main jet kit - 75, 78, 80, 82, 85, 87, 89 (in carb), 90, 92, 95.
Pilot jet kit - 35 (in carb), 40, 42. Adapter fitting for coolant line.